| Basic alloys: |
 |
1000 / 3000 / 5000 series (chemical composition A.A. standard) |
|
|
|
| Thickness: |
|
between 0.25 and 3.00 mm |
|
|
|
| Width: |
|
up to 1,550 mm |
|
|
|
| Length: |
|
coils or sheets up to 6,000 mm |
|
|
|
| Coating: |
|
polyamide, polyurethane, polyester, PVDF paints |
|
|
|
| Finishes: |
|
glossy - semi glossy - matt - metallic (both sides on request) |
|
|
|
| Colours: |
|
unlimited range (RAL colours and colours matched to sample provided) |
|
|
|
| Protective film: |
|
LDPE protection provided by UV-resistant |
|
|
|
| Weather resistance: |
|
maximum |
|
|
|
| Fire reaction: |
|
low flame spread (RWTUV certification, class A1*) |
|
|
|
| Workability: |
|
very thick coating resistant to bending and deformation, no cracking at a bends radius from 1T to 2T (it depends on basic alloys used) |
|
|
|
| Impact resistance: |
|
no cracking at a maximum of 10 Nm |
|
|
|
| Off-cuts recycling: |
|
100% recycle |
|
|
|
| Flatness: |
|
total "Panel Quality" (continuous stretching) in accordance with the EN 485-4 norm |
|
|
|
| Appearance: |
|
completely evenness of finish and colour |
|
|
|
Finishes: |
|
- polyester paint: DWALL BASIC
- polyurethane paint: DWALL KING
- polyamide paint: DWALL QUEEN
- PVDF paint: 0-2 DWALL PVDF (from 0.25 to 2.00 mm)
- PVDF paint: DMAX (from 2 to 3 mm)
|
|
|
|
|
|
* class A1 is the safest reaction class for building in Europe, in accordance with EN 13501-1 norm |
|
|
|
| NOTES: |
- The company reserves the right to implement modifications to comply with new legislation and to keep up with developments in technology.
- When installing or working with these sheets, the arrows printed on the protective film must be lined up to ensure even colour and sheen.
- All pre-coated Otefal panels must be installed with the arrows printed on the protective film facing the same direction.
- The above instructions must also be given to installers and end users and must be closely observed before cutting, profiling or installing sheets.
|
